With growing interest in energy efficient lighting, new lighting technologies such as LEDs offer distinctive opportunities because of their customizable colors and precision in control. Shenzhen Furuier Photoelectric introduced their 50W LED Flood Light with PIR Motion Sensor. The 50W slim LED flood light is designed to provide comfortable visibility of activity areas and possible hazards, as well as illuminate people, objects, and places to allow observation and identification while eliminating unnecessary glare, light pollution, or light trespass.
The simple yet elegant design of slim profile floodlight incorporates excellent heat dissipation making use of high purity die cast aluminum alloy that can have a thermal conductivity at room temperature of approximately 210 W/m-K. The tempered safety glass lens has been treated for strength and optimum light transmission (up to 98% of visible light). The high brightness SMD 2835 light sources produce 110 Lumens per watt. The exclusive optical design provides a luminous flux of 5000-6500lm in a wide beam angle of 120 degrees, delivering ultra bright light emission for maximum coverage and security. These LED lights are economically ideal due to the fact they consume only a fraction of the power of the old halogen floodlights and can help save up to a whopping 80% on your electricity bill. The luminaire is developed with driverless technology which remarkably extends its life span. In LED lighting, there exists a mismatch between the oeprational life of the circuit and that of the actual LED devices. LEDs devices most often have a much longer lifespan than their driver circuits.
This IP65 waterproof LED flood light is equipped with a passive infrared (PIR) sensor (PIR) that detects motion up to 8 meters. once movement is detected, the light will automatically switch on. PIR motion sensors detect motion using the infrared (IR) energy emitted by known temperature ranges of the objects that should be detected. For instance, the PIR sensor may be used to provide full power to a lamp when heat emitted by a human body is detected. Furthermore, the sensor is fully adjustable to modify the distance in which the light will detect motion. In addition, the control component can enable the light source to emit light for a period of time (e.g., predetermined, dynamically adjusted in a range of 2 seconds to 5 minutes) prior to switching the light source to an off state.
The luminaire is configured to adjust the illumination level of the light source. The efficient energy usage by a lighting system is further achieved by reducing the illumination level when a high illumination level is not needed. It is ideal for commercial and residential security lighting, but can also be used in a variety of other locations such as parking lots, garages, pathways, driveways, loading areas, project sites, and other areas that require visibility of any activity occurring in the monitored zone.
Greater energy savings and low maintenance costs with an average life up to 50000 hours. The high color rendering (CRI 80) LED flood lights come standard with 3000K, 4000K, 5000K, and 6000K. The housing is protected with white powder coating for enhanced aesthetics and provides greater corrosion resistance. Work on 220-240 volt AC power. Backed by a 3 year warranty.