Jingri JRL9 series LED wall washers are the perfect solution for the dynamic illumination of facade structures and landscapes by offering an exciting array of color changing possibilities through wall washing and grazing. This high performance RGB luminaire is engineered for sophisticated light output, yielding lasting performance, projecting long distances with a broad range of customization options to meet the needs of lighting designers, architects and specifiers. Each ultra bright OSRAM (or optial CREE) red, green and blue LED has a 256 color depth, delivering virtually limitless colour selection. Patented lens design prevides a very precise color mixing, creates a perfect color projection over a large area without any blemishes or color mismatch. The multi-angle beam configuration allows the polycarbonate lenses to be interchangeable, giving the option from a narrow beam (10°, 25°) or a wide beam (40°, 60°, 10x50°). The fixture is fully enclosed in a stylish and rugged 6063-T5 extruded aluminum profile with die cast aluminum end caps. Clear tempered glass lens enclosed in the housing and sealed with one-piece silicone gasket ensuring water-tight and dust-tight construction. Maximized on-site flexibility - field-adjustable mounting brackets to aid easy installation and removal with adjustable tilt design for precise fixture angle. The IP66 RGB architectural luminaire can be controlled using a DMX or a standard RGB controller. The IP66 RGB architectural luminaire can be operated as a single stand-alone fixture or in a multiple master/slave configuration with built-in pre-programmed color mixing effects. It is compatible with all industry available DMX 512 controllers or a standard RGB controller. Available in two nominal lengths - 505mm or 1000mm and a wide range of power - 10W (9 LEDs), 20W (9 LEDs), 14W (12 LEDs), 26W (12 LEDs), 20W (18 LEDs), 38W (18 LEDs), 27W (24 LEDs), 51W (24 LEDs), 38W (36 LEDs). Input voltage 24 VDC.